Extensive adaptability via software

Using the "Digalox^® Manager" configuration software, the measuring devices can be set up individually. By connecting a norm signal sensor the physical measured value is converted into the desired unit and transmitted as a practical floating point number. Once set up, the DPM72 will transmit your measuring data reliably and in real time - without the laborious installation of wiring.

Switching outputs

As individually adjustable threshold values ​​are reached, two galvanically isolated alarm outputs enable the device to trigger an alarm as well as to perform switch-on or switch-off operations.

Radio data transmission 2.4 GHz mesh network

Because of the XBEE radio interface the DPM72 measuring instruments are universally applicable. The measured values will be transmitted up to five times per second. The mesh network offers a robust connection that ensures continued operation even in case of individual radio nodes failure. Above all, this enables older or technically obsolete machines to be modernised easily (retrofitting) without having to replace them, which can be expensive and time-consuming.

RS485/Modbus interface

The RS485 Modbus interface of the DPM72 measuring devices ensures both configuration and transmission of all measured values. The RS485 Modbus protocol corresponds to the established industrial standard, which means that the DPM72 measuring devices with Modbus interface can be universally combined with existing Modbus devices from other manufacturers. Above all, this enables older or technically obsolete machines to be modernised easily (retrofitting) without having to replace them, which can be expensive and time-consuming.